Presence, position and occupancy across your sites. The hardware for this area is being finalised, so talk to us about your use case.
Whether a gate is open, a bay is occupied or an asset has moved, most of it is checked by eye or not at all. Between checks, you are guessing.
Gates, bays and stores that no one is watching, so you only find out after something has moved or gone.
Occupancy and access logged by hand, if at all, and out of date the moment it is written.
Equipment and stock move around a site with no record of where they are.
Nothing links a presence event to an action, so a response depends on someone noticing.
Put a sealed, battery-powered sensor on each condition you care about. It reports to one cloud platform, and Augos does the watching, so you only hear about it when something moves.
A wireless sensor on each condition, reporting to the minute, for years on a battery, with no wiring to run.
Set the range that matters. The moment a reading passes it, you get a message on WhatsApp.
Trigger a light, a gate or an alert automatically when presence is detected, or route it to whoever needs to know.
Each parameter is a separate sensor, so you deploy only the ones you need and add more anytime.
Whether something is there.
How far, or how close.
Whether a space is in use.
Know when a gate, door or barrier opens, and trigger a light or an alert.
See whether a bay, room or space is in use, live.
Know when equipment or stock is in place, or has left.
Detect presence in a zone and stop or slow a machine.
Every parameter here runs on the same wireless platform: a live dashboard, custom alerts on your thresholds, intelligent control, and data export. See how it fits together on the Augos Sense overview, or browse the other seven areas.
Set an upper limit, a lower limit, or both for any sensor here. The instant a reading passes it, the person who can act gets a message, on WhatsApp, email or SMS.
The proximity hardware is being finalised. Tell us what you need to detect, and we will advise on the right sensor for your site.
Start with a single sensor. No rip-and-replace and no commitment, one sensor live in 48 hours, and you add more once it proves out.
Book a demoWirelessly, over LoRa, NB-IoT or Sigfox, chosen for the coverage and density of your site. There is no wiring to run.
Years. The sensors are low-power and report on a schedule, or when a reading changes, so there is no mains and no cabling to plan for.
A single-sensor pilot is typically live within 48 hours of order. You add more sensors and sites the same way.
Set an upper limit, a lower limit or a rate of change on any sensor. The moment one is passed, the right person gets a message on WhatsApp, email or SMS.
Into one cloud platform, hosted in South Africa. Watch it live, set alerts, chart it, or export it for your own tools or an AI model.
Per sensor, plus connectivity monthly and the platform per deployment. The single-sensor pilot is the standard way in.
Book a short call. Tell us what you need to watch, and we'll show you the sensor, the alerts and the control working on your own site.
Book a demo