Measure your pipes and tanks, wirelessly.
Pressure, flow and level in your pipes and tanks, plus gas and leak detection, measured continuously. Get alerted the moment a reading passes a limit you set.
You cannot see what is happening inside your pipes and tanks.
Pressure, flow and level drive a lot of a plant, but most of it is read off a gauge someone walks past, if at all. A leak or a blockage can run for hours before anyone notices.
Leaks that run for hours
A leak on a line wastes product and water, and often the first sign is the bill or a puddle on the floor.
A tank that runs dry, or over
Without a level sensor, a tank overflows or runs empty, stopping a process or making a mess.
Pressure you assume
You assume a line is flowing at pressure until a pump fails or a filter blocks, and production drops.
Gas you cannot account for
Industrial gas use and leaks go unmeasured, wasting money and creating a hazard.
One sensor turns a blind spot into a live reading.
Put a sealed, battery-powered sensor on each condition you care about. It reports to one cloud platform, and Augos does the watching, so you only hear about it when something moves.
Measure it
A wireless sensor on each condition, reporting to the minute, for years on a battery, with no wiring to run.
Get told
Set the range that matters. The moment a reading passes it, you get a message on WhatsApp.
Act on it
Shut a valve or trip a pump automatically on a level, pressure or leak reading, or send someone before it becomes a mess.
The pipe and tank parameters.
Each parameter is a separate sensor, so you deploy only the ones you need and add more anytime.
Pressure (pipe)
Pressure inside a pipe or vessel.
Flow (pipe)
Flow rate through a pipe.
Level (tanks/silos)
Fill level in a tank or silo.
Industrial gas level
Level or concentration of a process gas.
Leak detection
Escaping liquid or gas.
Temperature
Process and fluid temperature.
Equipment temperature
Surface or bearing temperature.
Vibration
Vibration on pumps and motors.
Humidity
Air moisture in storage.
Dew point
Condensation on cold surfaces.
Water quality
Conductivity of process water.
Where sites put it to work.
Leak detection
Catch a leak on a line the moment it starts, before it becomes product on the floor.
Tank and silo levels
Know what is in every tank and silo, and get warned before it runs dry or overflows.
Line pressure and flow
Watch pressure and flow, so a failing pump or a blocked filter shows up straight away.
Gas monitoring
Track industrial gas level and use, and alert the moment there is a leak.
Water and effluent
Flow and level on supply and effluent lines, metered and watched around the clock.
Boiler and steam
Pressure and level on steam and hot-water systems, watched continuously for safety.
One place for every sensor and site.
Every parameter here runs on the same wireless platform: a live dashboard, custom alerts on your thresholds, intelligent control, and data export. See how it fits together on the Augos Sense overview, or browse the other seven areas.
Set the limits that matter, and hear about it the moment a threshold is exceeded.
Set an upper limit, a lower limit, or both for any sensor here. The instant a reading passes it, the person who can act gets a message, on WhatsApp, email or SMS.
Sealed sensors for pipes and tanks.
Sealed, battery-powered sensors that fit inline or onto a tank, reading pressure, flow and level and reporting over low-power wireless with no wiring to run.
Start with a single sensor. No rip-and-replace and no commitment, one sensor live in 48 hours, and you add more once it proves out.
Book a demoCommon questions.
How do the sensors connect?
Wirelessly, over LoRa, NB-IoT or Sigfox, chosen for the coverage and density of your site. There is no wiring to run.
How long do the batteries last?
Years. The sensors are low-power and report on a schedule, or when a reading changes, so there is no mains and no cabling to plan for.
How fast can we install?
A single-sensor pilot is typically live within 48 hours of order. You add more sensors and sites the same way.
What can it alert on, and how?
Set an upper limit, a lower limit or a rate of change on any sensor. The moment one is passed, the right person gets a message on WhatsApp, email or SMS.
Where does the data go?
Into one cloud platform, hosted in South Africa. Watch it live, set alerts, chart it, or export it for your own tools or an AI model.
How are you priced?
Per sensor, plus connectivity monthly and the platform per deployment. The single-sensor pilot is the standard way in.
Start with a single sensor.
Book a short call. Tell us what you need to watch, and we'll show you the sensor, the alerts and the control working on your own site.
Book a demo